JobInfo

BACKOFF_POLICY_EXPONENTIAL

public static final int BACKOFF_POLICY_EXPONENTIAL

Exponentially back-off a failed job. See JobInfo.Builder.setBackoffCriteria(long, int) retry_time(current_time, num_failures) = current_time + initial_backoff_millis * 2 ^ (num_failures - 1), num_failures >= 1

Constant Value: 1 (0x00000001)

BACKOFF_POLICY_LINEAR

public static final int BACKOFF_POLICY_LINEAR

Linearly back-off a failed job. See JobInfo.Builder.setBackoffCriteria(long, int) retry_time(current_time, num_failures) = current_time + initial_backoff_millis * num_failures, num_failures >= 1

Constant Value: 0 (0x00000000)

DEFAULT_INITIAL_BACKOFF_MILLIS

public static final long DEFAULT_INITIAL_BACKOFF_MILLIS

Amount of backoff a job has initially by default, in milliseconds.

Constant Value: 30000 (0x0000000000007530)

MAX_BACKOFF_DELAY_MILLIS

public static final long MAX_BACKOFF_DELAY_MILLIS

Maximum backoff we allow for a job, in milliseconds.

Constant Value: 18000000 (0x000000000112a880)

NETWORK_BYTES_UNKNOWN

public static final int NETWORK_BYTES_UNKNOWN

Sentinel value indicating that bytes are unknown.

Constant Value: -1 (0xffffffff)

NETWORK_TYPE_ANY

public static final int NETWORK_TYPE_ANY

This job requires network connectivity.

Constant Value: 1 (0x00000001)

NETWORK_TYPE_CELLULAR

public static final int NETWORK_TYPE_CELLULAR

This job requires network connectivity that is a cellular network.

Constant Value: 4 (0x00000004)

NETWORK_TYPE_METERED

public static final int NETWORK_TYPE_METERED

This constant is deprecated.
Cellular networks may be unmetered, or Wi-Fi networks may be metered, so this isn't a good way of selecting a specific transport. Instead, use NETWORK_TYPE_CELLULAR or NetworkRequest.Builder.addTransportType(int) if your job requires a specific network transport.

This job requires metered connectivity such as most cellular data networks.

Constant Value: 4 (0x00000004)

NETWORK_TYPE_NONE

public static final int NETWORK_TYPE_NONE

Default.

Constant Value: 0 (0x00000000)

NETWORK_TYPE_NOT_ROAMING

public static final int NETWORK_TYPE_NOT_ROAMING

This job requires network connectivity that is not roaming.

Constant Value: 3 (0x00000003)

NETWORK_TYPE_UNMETERED

public static final int NETWORK_TYPE_UNMETERED

This job requires network connectivity that is unmetered.

Constant Value: 2 (0x00000002)

CREATOR

public static final Creator<JobInfo> CREATOR

describeContents

public int describeContents ()

Describe the kinds of special objects contained in this Parcelable instance's marshaled representation. For example, if the object will include a file descriptor in the output of writeToParcel(android.os.Parcel, int), the return value of this method must include the CONTENTS_FILE_DESCRIPTOR bit.

equals

public boolean equals (Object o)

Indicates whether some other object is "equal to" this one.

The equals method implements an equivalence relation on non-null object references:

• It is reflexive: for any non-null reference value x, x.equals(x) should return true.
• It is symmetric: for any non-null reference values x and y, x.equals(y) should return true if and only if y.equals(x) returns true.
• It is transitive: for any non-null reference values x, y, and z, if x.equals(y) returns true and y.equals(z) returns true, then x.equals(z) should return true.
• It is consistent: for any non-null reference values x and y, multiple invocations of x.equals(y) consistently return true or consistently return false, provided no information used in equals comparisons on the objects is modified.
• For any non-null reference value x, x.equals(null) should return false.

The equals method for class Object implements the most discriminating possible equivalence relation on objects; that is, for any non-null reference values x and y, this method returns true if and only if x and y refer to the same object (x == y has the value true).

Note that it is generally necessary to override the hashCode method whenever this method is overridden, so as to maintain the general contract for the hashCode method, which states that equal objects must have equal hash codes.

getBackoffPolicy

public int getBackoffPolicy ()

Return the backoff policy of this job.

getClipData

public ClipData getClipData ()

getClipGrantFlags

public int getClipGrantFlags ()

getEstimatedNetworkDownloadBytes

public long getEstimatedNetworkDownloadBytes ()

Return the estimated size of download traffic that will be performed by this job, in bytes.
Value is a non-negative number of bytes.

getEstimatedNetworkUploadBytes

public long getEstimatedNetworkUploadBytes ()

Return the estimated size of upload traffic that will be performed by this job, in bytes.
Value is a non-negative number of bytes.

getExtras

public PersistableBundle getExtras ()

getFlexMillis

public long getFlexMillis ()

Flex time for this job. Only valid if this is a periodic job. The job can execute at any time in a window of flex length at the end of the period.

getId

public int getId ()

Unique job id associated with this application (uid). This is the same job ID you supplied in the Builder constructor.

getInitialBackoffMillis

public long getInitialBackoffMillis ()

The amount of time the JobScheduler will wait before rescheduling a failed job. This value will be increased depending on the backoff policy specified at job creation time. Defaults to 30 seconds, minimum is currently 10 seconds.

getIntervalMillis

public long getIntervalMillis ()

Set to the interval between occurrences of this job. This value is not set if the job does not recur periodically.

getMaxExecutionDelayMillis

public long getMaxExecutionDelayMillis ()

getMinFlexMillis

public static final long getMinFlexMillis ()

Query the minimum flex time allowed for periodic scheduled jobs. Attempting to declare a shorter flex time than this when scheduling such a job will result in this amount as the effective flex time for the job.

getMinLatencyMillis

public long getMinLatencyMillis ()

Set for a job that does not recur periodically, to specify a delay after which the job will be eligible for execution. This value is not set if the job recurs periodically.

getMinPeriodMillis

public static final long getMinPeriodMillis ()

Query the minimum interval allowed for periodic scheduled jobs. Attempting to declare a smaller period than this when scheduling a job will result in a job that is still periodic, but will run with this effective period.

getNetworkType

public int getNetworkType ()

This method is deprecated.
This method attempts to map getRequiredNetwork() into the set of simple constants, which results in a loss of fidelity. Callers should move to using getRequiredNetwork() directly.

Return the basic description of the kind of network this job requires.

getRequiredNetwork

public NetworkRequest getRequiredNetwork ()

Return the detailed description of the kind of network this job requires, or null if no specific kind of network is required.

getService

public ComponentName getService ()

Name of the service endpoint that will be called back into by the JobScheduler.

getTransientExtras

public Bundle getTransientExtras ()

getTriggerContentMaxDelay

public long getTriggerContentMaxDelay ()

When triggering on content URI changes, this is the maximum delay we will use before scheduling the job.

getTriggerContentUpdateDelay

public long getTriggerContentUpdateDelay ()

When triggering on content URI changes, this is the delay from when a change is detected until the job is scheduled.

getTriggerContentUris

public TriggerContentUri[] getTriggerContentUris ()

Which content: URIs must change for the job to be scheduled. Returns null if there are none required.

hashCode

public int hashCode ()

Returns a hash code value for the object. This method is supported for the benefit of hash tables such as those provided by HashMap.

The general contract of hashCode is:

• Whenever it is invoked on the same object more than once during an execution of a Java application, the hashCode method must consistently return the same integer, provided no information used in equals comparisons on the object is modified. This integer need not remain consistent from one execution of an application to another execution of the same application.
• If two objects are equal according to the equals(Object) method, then calling the hashCode method on each of the two objects must produce the same integer result.
• It is not required that if two objects are unequal according to the equals(java.lang.Object) method, then calling the hashCode method on each of the two objects must produce distinct integer results. However, the programmer should be aware that producing distinct integer results for unequal objects may improve the performance of hash tables.

As much as is reasonably practical, the hashCode method defined by class Object does return distinct integers for distinct objects. (This is typically implemented by converting the internal address of the object into an integer, but this implementation technique is not required by the Java™ programming language.)

isImportantWhileForeground

public boolean isImportantWhileForeground ()

isPeriodic

public boolean isPeriodic ()

Track whether this job will repeat with a given period.

isPersisted

public boolean isPersisted ()

isPrefetch

public boolean isPrefetch ()

isRequireBatteryNotLow

public boolean isRequireBatteryNotLow ()

isRequireCharging

public boolean isRequireCharging ()

isRequireDeviceIdle

public boolean isRequireDeviceIdle ()

isRequireStorageNotLow

public boolean isRequireStorageNotLow ()

toString

public String toString ()

Returns a string representation of the object. In general, the toString method returns a string that "textually represents" this object. The result should be a concise but informative representation that is easy for a person to read. It is recommended that all subclasses override this method.

The toString method for class Object returns a string consisting of the name of the class of which the object is an instance, the at-sign character `@', and the unsigned hexadecimal representation of the hash code of the object. In other words, this method returns a string equal to the value of:

 getClass().getName() + '@' + Integer.toHexString(hashCode())
 

writeToParcel

public void writeToParcel (Parcel out, 
                int flags)

Flatten this object in to a Parcel.